What should I do if there is mold under the tatami? Comprehensive Solutions and Prevention Guide
As a representative of Japanese home furnishings, tatami is loved for its environmental protection and comfort. However, if it is kept in a humid environment for a long time, the bottom of the tatami will easily become moldy, which not only affects the appearance, but may also be harmful to health. This article will combine the popular anti-mold topics on the Internet in the past 10 days to provide you with structured solutions and attach relevant data for reference.
1. Analysis of common causes of mold on tatami mats
| Ranking | Causes of mold | Proportion (discussion data of the entire network) |
|---|---|---|
| 1 | The ambient humidity is too high (>70%) | 43% |
| 2 | Direct contact with the ground without moisture-proof layer | 32% |
| 3 | Failure to clean in time causes stains to penetrate | 18% |
| 4 | The material itself has poor mildew resistance | 7% |
2. 5 steps for emergency treatment of moldy tatami
1.Isolate the source of pollution: Immediately remove moldy tatami to avoid the spread of spores
2.Physical mildew removal: Use a hard-bristled brush dipped in 75% alcohol to scrub the mold spots (pay attention to ventilation)
3.Deep disinfection: Dilute sodium hypochlorite solution at a ratio of 1:50 for wiping
4.Drying process: Expose to the sun for 6 hours or use a dehumidifier to continuously dehumidify for 24 hours
5.Odor elimination: Place activated carbon bags or coffee grounds to absorb residual odors
3. Practical tips to prevent mold on tatami mats
| Measure type | Specific methods | Effectiveness Rating (1-5★) |
|---|---|---|
| environmental control | Keep indoor humidity 40-60% | ★★★★★ |
| physical protection | Lay moisture-proof mat (thickness ≥ 3mm) | ★★★★☆ |
| Routine maintenance | Turn over the tatami monthly to ventilate | ★★★☆☆ |
| Auxiliary tools | Use dehumidification box/anti-mold sheet | ★★★☆☆ |
4. Treatment plans for different degrees of mildew
1.Slight mildew (mildew area <10%): You can use white vinegar + baking soda paste and apply it for 30 minutes before wiping.
2.Moderate mildew (mildew area 10-30%): Need to use professional anti-mildew spray, let it sit for 2 hours and then clean it up
3.Severe mildew (mildew area >30%): It is recommended to replace the tatami with new ones. The old tatami needs to be professionally treated.
5. Evaluation data of popular anti-mildew products in 2023
| product type | Represent the brand | Anti-mildew aging | User praise rate |
|---|---|---|---|
| Moisture-proof pad | Sanwa | 3-5 years | 94% |
| Dehumidifier | Bai Yuan | 2-3 months/box | 88% |
| Anti-mildew spray | Uyeki | 1-2 weeks/time | 91% |
6. Expert advice
1. A comprehensive anti-mildew treatment should be carried out before the rainy season every year
2. Choose high-quality tatami with grass surface density ≥1600g/㎡
3. Keep windows open for ventilation at least once a week (when humidity is low)
4. If mildew is found, it should be dealt with within 72 hours to prevent the mildew from penetrating into the fibers.
Through the above systematic solutions, combined with regular maintenance, the problem of moldy tatami can be effectively solved. It is recommended to save this article for future reference!
check the details
check the details
en
